 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Subminiature Fuses TE5(R) > Fast-Acting > 808 Series 808 Series, TE5(R), Fast-Acting Fuse Description (R) Features Agency Approvals Agency Agency File Number Ampere Range E67006 1.00A 2.00A 3.15A 5.00A 1.60A 2.50A 4.00A Applications Electrical Characteristics % of Ampere Rating 100% 200% Opening Time Electrical Characteristics Ampere Rating (A) 1.00 1.60 2.00 2.50 3.15 4.00 5.00 Amp Code 1100 1160 1200 1250 1315 1400 1500 Max Voltage Rating (V) AC 250 250 250 250 250 250 250 DC 450 450 450 450 350 250 250 Interrupting Rating AC DC Min 300A 300A 300A 300A 300A 300A 300A Max Nominal Cold Resistance (Ohms) 0.252 0.129 0.094 0.069 0.052 0.035 0.026 Nominal Melting I2t (10In A2sec) 0.0066 0.0344 0.0610 0.0898 0.2191 0.5445 1.1584 Max Voltage Drop (mV) 510 400 342 300 270 240 215 Agency Approvals (c) 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/808.html for current information. 1 Revised: July 24, 2009 808 Series 808 Series Introduction Subminiature Fuses to Circuit Protection Transientology TE5(R) > Fast-Acting > 808 Series Temperature Derating Curve 140 PERCENT OF RATING 120 100 80 60 40 20 0 -60 -20 20 60 ) 100 140 AMBIENT TEMPERATURE ( Average Time Current Curves 3.15A 1.0A 2.5A 2.0A 1.5A 4.0A 5.A 25C 100 10 TIME IN SECONDS 1 0.1 0.01 0.001 1 10 100 1000 CURRENT IN AMPERES Soldering Parameters - Wave Soldering Temperature ( ) - Measured on bottom side of board 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 100 110 10 20 30 40 50 60 70 80 90 120 130 140 150 160 170 180 190 200 210 220 230 240 0 Recommended Process Parameters: Wave Parameter Preheat: 100 150 Solder Pot Temperature: Solder Dwell Time: 260 Lead-free Recommendation Time (Seconds) Preheat Time Dwell Time Cooling Time Recommended Hand-Solder Parameters: Note: These devices are not recommended for IR or Convection Reflow process. 808 Series 2 (c) 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/808.html for current information. Subminiature Fuses TE5(R) > Fast-Acting > 808 Series Product Characteristics Materials Operating Temperature Climatic Category Product Marking Solderability Soldering Heat Resistance Stock Conditions Vibration Resistance Dimensions O8.9 max. 8.9 4.65mm Part Numbering System 808 xxxx 0000 8.90mm O0.6 L 0.5 min Amp Code 4.01.0 4.00.5 7.50.3 1 +0.1 dlai 0.50mm Packing Option 0.60mm 5.08 0000 Tape/Ammopack (1000pcs) 0440 Short Leads - Bulk (1000pcs) 0075 7.5mm Pitch - Bulk (1000pcs) 1 +0.1 Holes in PCB Holes in PCB 7.5mm Pitch Long Leads (L=18.8mm) Short Leads (L=4.3mm) Packaging Packaging Option 808 Series 0000 0440 0075 Packaging Specification Quantity Quantity & Packaging Code Taping Width (c) 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/808.html for current information. 3 808 Series 808 Series Series Introduction to Circuit Protection Transientology 4 (c) 2009 Littelfuse, Inc. Specifications are subject to change without notice. |
Price & Availability of 80812500000
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |